高奇玉

一、基本信息：

二、学习工作经历：

2011.09至2015.06,南京航空航天大学,材料科学与工程,学士

2016.09至2018.04,南京航空航天大学,光学工程,硕士阶段（硕博连读）

2018.04至2022.12,南京航空航天大学,凝聚态物理,博士

2021.08至2022.08,新加坡南洋理工大学,材料科学与工程,博士联培

2023.02至2025.05,南京航空航天大学,材料科学与工程,博士后

2025.05至今,滁州学院,专任教师

三、研究项目、论文、知识产权、成果、获奖等情况

（一）主要科研项目：

2024.09至2027.08,江苏省自然科学基金青年基金项目BK20241424,在研,主持

2023.09至2025.05,江苏省卓越博士后人才计划2023ZB687,结题,主持

2025.01至2028.12,国家自然科学基金面上项目52475365,在研,参与

2023.08至2026.06,安徽省重点研究与开发计划202304a05020067,在研,参与

2019.01至2022.12,国家自然科学基金面上项目51975285,结题,参与

（二）代表性学术论文

[1]Gao Q., Ling W., Zhou Y., Zhan X.*, Shen H.*. Correlation between special bud-shaped area and molten pool flow in laser cladding high-entropy alloy on TC4 surface[J]. International Journal of Thermal Sciences, 2023, 183, 107825.

[2]Gao Q., Yan T., Ling W., Bu H., Zhan X.*, Shen H.*. Effect of vapor/plasma-liquid flow behavior on the keyhole oscillation in laser-MIG hybrid welding of Invar alloy[J]. Optics and Laser Technology, 2021, 140, 107054.

[3]Gao Q.*, Lyu F., Wang L., Zhan X.*. Investigation of Arc Stability in Wire-Arc Additive Manufacturing of 2319 Aluminum Alloy[J]. Materials, 2024, 17, 5160.

[4]Gao Q., Bu H., Ling W., Zhan X.*, Shen H.*. Effect of defocusing amount on morphology and microstructure of 8-mm-thick Ti-6Al-4V laser deep penetration welded joint[J]. International Journal of Advanced Manufacturing Technology, 2022, 119 (5-6), 3747-3756.

[5]Gao Q., Zhan X.*, Shen H.*, Bu H., Ling W., Yan T. Microstructure and alloy element distribution near the fusion line of aluminum alloy 6061 in laser wire-filling welding[J]. Modern Physics Letters B, 2020, 34 (29), 2050317.

[6]Gao Q., Zhan X.*, Shen H.*, Ling W., Bu H. Effect of welding sequence on stress and deformation field of Invar alloy multi-layer and multi-pass welding: A simulation study[J]. Modern Physics Letters B, 2020, 34 (13), 2050129.

[7]Gao Q., Li Y., Wang H.-E., Liu W., Shen H.*, Zhan X.*. Effect of Scanning Speed with UV Laser Cleaning on Adhesive Bonding Tensile Properties of CFRP[J]. Applied Composite Materials, 2019, 26 (4), 1087-1099.

[8] Tian F.,Gao Q.*, Wang L., Guan X., Zhan X.*. The effect of Ta alloyed state on the corrosion resistance of TC4 surface laser cladding high entropy alloy[J]. Journal of Materials Research and Technology, 2025, 34, 220-232.

[9] Li Y.,Gao Q.*, Guan X., Tian F., Li B., Zhan X.*. Effect of WC on the microstructure and wear resistance of Invar-WC coatings prepared by laser fusion cladding, Journal of Materials Research and Technology, 2025,34, 2285-2297.

[10] Zhan X.*,Gao Q., Gu C., Sun W., Chen J., Wei Y. The porosity formation mechanism in the laser-MIG hybrid welded joint of Invar alloy[J]. Optics and Laser Technology, 2017, 95, 86-93.

[11] Tian F., Wang L.,Gao Q.* Zhang J. Research on the stress distribution and prediction at the gradient interfaces of TC4/TiC gradient materials prepared by LMD. Int J Adv Manuf Technol 2025, 137, 3061-3075.

[12] Zhan X., Ling W., Wang X.,Gao Q.*, Liu L*. Investigation of residual stress influence on fatigue crack growth in remanufactured titanium alloy with inhomogeneous microstructure. Journal of Materials Research and Technology, 2025, 36, 5521-5538.

（三）科研奖励

江苏省卓越博士后人才计划2023年